0 item(s) | € 0,-
Winkelmandje

Uw winkelmandje is nog leeg

100W Single Output Industrial DIN Rail Power Supply 24V 4.2A
  • Afbeelding van 100W Single Output Industrial DIN Rail Power Supply 24V 4.2A

100W Single Output Industrial DIN Rail Power Supply 24V 4.2A

€ 45,95


Veilig afrekenen
Dit product is op voorraad bij onze leverancier

Omschrijving

universele AC-ingang / volledig bereik Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Isolation class II ledindicator aan/uit No load power consumption<1W 100% full load burn-in test 3 jaar garantie enkel voor professioneel gebruik Dit toestel moet geïnstalleerd worden door een bevoegd technicus. OUTPUT: DC VOLTAGE: 24V nominale stroom: 4.2A stroombereik: 0 ~ 4.2A RIPPLE & NOISE (max.) Note.2: 150mVp-p bereik spanningsregeling: 24 ~ 29V VOLTAGE TOLERANCE Note.3: ±1.0% lijnregulatie: ±1.0% lastregulatie: ±1.0% start-, stijgtijd: 2700ms, 80ms/230VAC 2700ms, 80ms/115VAC at full load intervaltijd (typ.): 50ms/230VAC 18ms/115VAC at full load rated power: 100 W ingang: spanningsbereik: 88-264VAC, 124-370VDC frequentiebereik: 47 ~ 63Hz rendement (typ.): 89% AC-stroom (typ.): 3A/115VAC 1.6A/230VAC inschakelstroom (typ.): COLD START 30A/115VAC 45A/230VAC beveiliging: OVERLOAD Note.6: 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER VOLTAGE: 30 ~ 35V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE: 90°C ±15°C (RTH2) detect on heatsink of power transistor Protection type : Shut down o/p voltage, re-power on to recover omgeving: WORKING TEMP.: -20 ~ +60°C (Refer to "Derating Curve") bedrijfsvochtigheid: 20 ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY: -40 ~ +85°C , 10 ~ 95% RH TEMP. COEFFICIENT: ±0.03%/°C (0 ~ 50°C ) trillingsniveau: Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes, Mounting: Compliance to IEC60068-2-6 486K SAFETY & EMC (Note 4): SAFETY STANDARDS: UL60950-1, TUV EN60950-1 approved, design refer to EN50178 isolatiespanning: I/P-O/P:3KVAC ISOLATION RESISTANCE: I/P-O/P:>100M Ohms / 500VDC / 25°C / 70% RH EMC EMISSION: Compliance to EN61204-3, EN55022 Class B, EN61000-3-2,-3 EMC IMMUNITY: Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A andere: MTBF: 486K hrs min. MIL-HDBK-217F (25°C ) afmetingen: 100 x 93 x 56mm verpakking: 0.35Kg, 36pcs/13.6Kg/0.89CUFT